Crack

Kamis, 02 Agustus 2018

DAFTAR LENGKAP NAMA BANDAR UDARA & PELABUHAN 34 PROVINSI DI INDONESIA

PROVINSI

BANDAR UDARA

PELABUHAN
1.      Nanggro
Aceh Darussalaam
·        Bandara Sultan Iskandar Muda, Aceh Besar.

·        Bandara Maimun Saleh, Sabang.

·        Bandara Malikus Saleh, Aceh Utara.

·        Bandara Simeulue, Lasikin.

·        Bandara Rembele, Gampong Bale Atu.

·        Bandara Cut Nyak Dhien, Nagan Raya.

·        Bandara Senubung, Blangkejeren.
·        Pelabuhan Kuala Langsa, Langsa.
·        Pelabuhan Krueng Geukuh, Aceh.
·        Pelabuhan Ulee Lheue, Malahayati.
·        Pelabuhan Balohan, Sabang.
·        Pelabuhan Meulaboh, Aceh Barat.
·        Pelabuhan Sinabang, Kab. Simeulue.
·        Pelabuhan Singkil & Pulau Banyak, Kab. Aceh Singkil.
·        Pelabuhan Yoseph Iskandar, Tapaktuan, Kab. Aceh Selatan.
·        Pelabuhan Idi, Kab. Aceh Timur.
·        Pelabuhan Susoh, Kab. Aceh Barat Daya.
·        Pelabuhan Calang, Kab. Aceh Jaya.
2.      Sumatera
Utara
·        Bandara Silangit, Siborong-borong.
·        Bandara Dr. Ferdinand Lumban Tobing, Pinang Sori.
·        Bandara Sibisa, Kab. Toba Samosir.
·        Bandara Lasondre, Nias Selatan.
·        Bandara Binaka, Gunung Sitoli.
·        Bandara Aek Godang, Tapanuli Selatan.
·        Bandara Kuala Namu, Deli Serdang.
·        Pelabuhan Belawan, Medan.

·        Pelabuhan Sambas, Sibolga.

·        Pelabuhan Gunung Sitoli, Gunung Sitoli.

·        Pelabuhan Tanjung Balai, Tanjung Balai.
3.      Sumatera
Barat
·        Bandara Minangkabau, Padang Pariaman.

·        Bandara Rokot, Kep. Mentawai.

·        Bandara Pusako Anak Nagari, Pasaman Barat.
·        Pelabuhan Muara, Padang.

·        Pelabuhan Teluk Bayur, Padang.
4.   Riau
·        Bandara Internasional Sultan Syarif Kasim II (Bandara Simpang Tiga), Pekanbaru.

·        Bandara Tuanku Tambusai Pasir Pangaraian, Rokan Hulu.

·        Bandara Japura, Indragiri Hulu.

·        Bandara Pinang Kampai, Dumai.

·        Bandara Sei Selari (Bandara Sungai Pakning), Bengkalis.

·        Bandara Tempuling, Indragiri Hilir.
·        Pelabuhan Sungai Pakning, Dumai, Riau.
4.      Kepulauan
Riau
·        Bandara Sei Bati, Karimun.

·        Bandara Dabo, Lingga.

·        Bandara Internasional Hang Nadim, Batam.

·        Bandara Matak, Kepulauan Anambas.

·        Bandara Internasional Raja Haji Fisabilillah (Bandara Kijang), Tanjungpinang.

·        Bandara Ranai, Natuna.

·        Bandara Letung, Anambas.
·        Pelabuhan ASDP Desa Jagoh, Lingga, Kepulauan Riau.
·        Pelabuhan ASDP Dompak, Tanjungpinang, Kepulauan Riau.
·        Pelabuhan ASDP Parit Rempak, Karimun, Kepulauan Riau.
·        Pelabuhan ASDP Tanjung Uban, Bintan, Kepulauan Riau.
·        Pelabuhan ASDP Telaga Punggur, Batam, Kepulauan Riau.
·        Pelabuhan Bakong, Lingga, Kepulauan Riau.
·        Pelabuhan Batam Centre, Batam, Kepulauan Riau.
·        Pelabuhan Batu Ampar, Batam, Kepulauan Riau.
·        Pelabuhan Bulang Linggi, Bintan, Kepulauan Riau.
·        Pelabuhan Dabo Singkep, Lingga, Kepulauan Riau.
·        Pelabuhan Harbour Bay, Batam, Kepulauan Riau.
·        Pelabuhan Kijang Sri Bayintan, Bintan, Kepulauan Riau.
·        Pelabuhan Kote, Lingga, Kepulauan Riau.
·        Pelabuhan Letung Jemaja, Kepulauan Anambas, Kepulauan Riau.
·        Pelabuhan Marok Tua, Lingga, Kepulauan Riau.
·        Pelabuhan Midai, Natuna, Kepulauan Riau.
·        Pelabuhan Nongsa, Batam, Kepulauan Riau.
·        Pelabuhan Pancur, Lingga, Kepulauan Riau.
·        Pelabuhan Penagih, Natuna, Kepulauan Riau.
·        Pelabuhan Penuba, Lingga, Kepulauan Riau.
·        Pelabuhan Pulau Laut, Natuna, Kepulauan Riau.
·        Pelabuhan Pulau Subi, Natuna, Kepulauan Riau.
·        Pelabuhan Sei Tenam, Lingga, Kepulauan Riau.
·        Pelabuhan Senayang, Lingga, Kepulauan Riau.
·        Pelabuhan Sekupang, Batam, Kepulauan Riau.
·        Pelabuhan Sijantung, Batam, Kepulauan Riau
·        Pelabuhan Sri Bintan Pura, Tanjungpinang, Kepulauan Riau.
·        Pelabuhan Sri Payung, Tanjungpinang, Kepulauan Riau.
·        Pelabuhan Sungai Buluh, Lingga, Kepulauan Riau.
·        Pelabuhan Sunggak, Kepulauan Anambas, Kepulauan Riau.
·        Pelabuhan Tanjung Balai Karimun, Karimun, Kepulauan Riau.
·        Pelabuhan Tanjung Buton, Lingga, Kepulauan Riau.
·        Pelabuhan Tanjung Setelung Serasan, Natuna, Kepulauan Riau.
·        Pelabuhan Tarempa, Kepulauan Anambas, Kepulauan Riau.
·        Pelabuhan Telaga Punggur, Batam, Kepulauan Riau.
6.   Jambi
·        Bandara Internasional Sultan Thaha, Jambi .

·        Bandara Muara Bungo,  Bungo.

·        Bandara Depati Parbo, Kerinci.
·        Pelabuhan Talang Duku, Muaro Jambi.
·        Pelabuhan Kuala Tungkal, Tanjung Jabung Barat.
·        Pelabuhan Muaro Sabak, Tanjung Jabung Timur.
·        Pelabuhan Nipah Panjang, Tanjung Jabung Timur.
7.    Sumatera
Selatan
·        Bandara Atungbungsu, Pagaralam.
·        Bandara Banding Agung, Banding Agung.
·        Bandara Pendopo, Penukal Abab.
·        Bandara Silampari, Lubuklinggau.
·        Bandara Internasional Sultan Mahmud Badaruddin II, Palembang.
·        Pelabuhan Tanjung Api-api, Banyuasin.
8.    Bangka
Belitung
·        Bandara Depati Amir, Bangka Belitung.
·        Bandara Internasional H.A.S Hanandjoeddin (Bandara Buluh Tumbang), Bangka Belitung.
·        Pelabuhan Pangkal Balam, Bangka Belitung.
·        Pelabuhan Tanjung Pandan, Bangka Belitung.
·        Pelabuhan Penyeberangan Muntok, Bangka Barat.
·        Pelabuhan Tanjung Gudang Belinyu, Bangka Belitung.
·        Pelabuhan Tanjung Batu, Bangka Belitung.
·        Pelabuhan Tukak, Bangka Belitung.
·        Pelabuhan Laut Sadai, Bangka Selatan.
·        Pelabuhan Dendang, Belitung Timur.
·        Pelabuhan Mangar, Belitung Timur.
·        Pelabuhan Ikan Jelitik, Bangka.
·        Pelabuhan Manau, Pangkal Pinang.
9.    Bengkulu
·        Bandara Enggano, Enggano.
·        Bandara Mukomuko, Mukomuko.
·        Bandara Fatmawati Soekarno (Bandara Padang Kemiling), Bengkulu.
·        Pelabuhan Pulau Baai (Pelabuhan Bengkulu), Bengkulu.
10. Lampung
·        Bandara Internasional Gatot Subroto, Way Kanan.
·        Bandara Pekon Serai, Pesisir Barat.
·        Bandara Radin Inten II, Bandar Lampung.
·        Pelabuhan Panjang, Bandar Lampung.
·        Pelabuhan Srengsem, Bandar Lampung.
·        Pelabuhan Bakauheni, Lampung Selatan.
11. DKI Jakarta
·        Bandara Internasional Halim Perdana Kusuma, Jakarta.
·        Bandara Internasional Soekarno Hatta, Tangerang.
·        Bandara Pulau Panjang, Kepulauan Seribu.
·        Pelabuhan Tanjung Priuk, Jakarta Timur.
·        Pelabuhan Marina Ancol, Jakarta Utara.
·        Pelabuhan Muara Angke, Jakarta Utara.
·        Pelabuhan Marunda, Jakarta Utara.
·        Pelabuhan Sunda Kelapa, Jakarta Utara.
·        Pelabuhan Muara Baru, Jakarta Utara.
·        Pelabuhan Pantai Mutiara, Jakarta Utara.
12. Jawa Barat
·      Bandara Wiriadinata,Tasikmalaya.  
·       Bandara Cakra Bhuwana, Cirebon. 
·        Bandara HuseinSastranegara, Bandung.
Cirebon
13. Banten
Soekarno-Hatta
Karangantu, Paku Anyer
14. Jawa Tengah
Adisumarmo
Batang
15. D.I Yogyakarta
Adi Sucipto
Tanjung Adikarto
16. Jawa Timur
Juanda
Tanjung Perak
17. Bali
Ngurah Rai
Gilimanuk
18. Nusa Tenggara Barat
Lombok
Kayangan
19. Nusa Tenggara Timur
El Tari Kupang
Waikelo
20.Kalimantan Barat
Supadio
Sintete
21. Kalimantan Tengah
Iskandar
Kuala Pembuang
22. Kalimantan Selatan
Syamsuddin Noor
Lama
23. Kalimantan Timur
Kalimarau
Jangkar
24. Kalimantan Utara
Juwata
Tengkayu I
25. Sulawesi Utara
SamRatulangi
Terminal Penyebrangan Lembeh
26. Sulawesi Barat
Tampa Padang, Mamuju
Mamuju
27. Sulawesi Tengah
Mutiara Sis Al Jufri
Tangkiang
28. Sulawesi Tenggara
Baubau
Murhum
29. Sulawesi Selatan
Sultan Hasanuddin
Paotere
30. Gorontalo
Djalaludin
Anggrek
31.  Maluku
Pattimura
Hitu
32. Maluku Utara
Sultan Babullah
Bastiong
33. Papua Barat
Domine Eduard Osok
Depapre
34. Papua 
Sentani
Rakyat
di Tidak ada komentar:
Label:

Rabu, 01 Agustus 2018

Panduan Lengkap & Penggunaan Google Search Console

Google Search Console
 (dulu bernama Google Webmaster Tools) adalah salah satu layanan gratis dari Google yang ditujukan untuk para webmaster (pemilik blog atau website). Layanan ini bisa membantu webmaster yang ingin website-nya teroptimasi dan mempunyai struktur yang sesuai dengan aturan-aturan dan rekomendasi search engine Google (terutama dari sisi on-page).
Google Search Console banyak dimanfaatkan para praktisi SEO untuk mengoptimasi website-website milik mereka sendiri maupun website milik klien. Mulai dari mengidentifikasi halaman-halaman duplikat, halaman-halaman yang tidak ditemukan (404), melihat status indeks sampai dengan menganalisa CTR (click through rate) di halaman pencarian.
Bagi Anda yang fokus di bidang SEO, ini adalah salah satu tool wajib agar website-website yang Anda kelola senantiasa sesuai dengan guidelines Google.
Berikut ini saya berikan panduan cara penggunaan Google Search Console secara lengkap dan mendalam, sehingga nantinya bisa Anda praktekkan dengan maksimal.

Cara Mendaftar di Google Search Console

Pertama-tama, Anda harus mendaftar (gratis) untuk bisa memakai layanan ini.
Buka https://www.google.com/webmasters/tools/home?hl=in dan masuk (login) menggunakan akun gmail Anda.
Setelah itu, masukkan url website Anda dikotak yang disediakan dan klik “Tambahkan Properti”
Di halaman selanjutnya Anda akan diminta untuk melakukan verifikasi kepemilikan website.
Download file html yang disediakan, kemudian upload ke website Anda (bagi pengguna WordPress self host bisa melalui cpanel).
Bagi pengguna All In One SEO Pack, ada cara yang lebih mudah.
Klik dibagian “Metode Alternatif” kemudian Pilih “Tag HTML”
Salin kode yang ditandai di gambar diatas kemudian paste-kan ke All In One SEO Pack dibagian menu Webmaster Verification >> Google Webmaster Tools.
Jika sudah, klik save.
Kemudian balik lagi ke Google Search Console, klik “Verifikasi”.
Selesai.
Setelah melakukan verifikasi diatas, Website Anda akan langsung aktif dan Anda bisa melanjutkan ke langkah-langkah berikutnya.

di Tidak ada komentar:

Canon iR6020 Error Codes List page

  • Code: E000-000
  • Description:The main thermistor (TH1) has poor contact or an open circuit. The thermal switch (TP1) has an open circuit. The fixing heater has an open circuit. The AC driver is faulty. The DC controller PCB is faulty.
    After the main power switch is turned on, the temperature detected by the main thermistor does not reach 70°C.
    The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).
  • Code: E001-0001
  • Description:The main thermistor (TH1) has a short circuit. The sub thermistor (TH2) has detected overheating. The AC driver is faulty. The DC controller PCB is faulty.
    The main thermistor or the sub thermistor has detected about 230°C or higher for 2 sec.
    The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).
  • Code: E001-0002
  • Description:The main thermistor (TH1) has a short circuit. The sub thermistor (TH2) has detected overheating. The AC driver is faulty. The DC controller PCB is faulty.
    The main thermistor has detected 230°C or higher (hard circuit detection).
    The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).
  • Code: E001-0003
  • Description:The main thermistor (TH1) has a short circuit. The sub thermistor (TH2) has detected overheating. The AC driver is faulty.
    The DC controller PCB is faulty.The sub thermistor has detected about 236°C or higher.
    The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).
  • Code: E002-0000
  • Description:The main thermistor (TH1) has poor contact or an open circuit. The thermal switch (TP1) has an open circuit. The AC driver is faulty. The DC controller is faulty.
    The temperature of the upper fixing roller does not reach 100°C within 2 min after it has exceeded 70°C.
    The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).
  • Code: E003-0000
  • Description:The main thermistor (TH1) has poor contact or an open circuit. The thermal switch (TP1) has an open circuit. The fixing heater has an open circuit. The AC driver is faulty. The DC controller PCB is faulty.
    The temperature detected by the main thermistor is 70°C for 2 sec or more after it has reached 100°C.
    The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).
  • Code: E004-0000
  • Description:The AC driver has a short circuit. The DC controller PCB is faulty.
    The AC driver is found to have a short circuit (hard circuit detection).
    The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).
  • Code: E005-0000
  • Description:The fixing web has been taken up. The fixing web length sensor (PS45) is faulty. The DC controller PCB is faulty.
    The length of fixing web that has been taken up is in excess of the specified length.
    After replacing the fixing web, be sure to reset the two web counters in service mode: COPIER>COUNTER>MISC>FIX-WEB and COPIER> COUNTER>DRBL-1>FX-WEB
    • Code: E010-0000
    • Description:The main motor (M2) is faulty. The DC controller PCB is faulty.
      The clock pulses do not arrive for 2 secs or more after the main motor drive signal (MMFG) has been generated.
    • Code: E012-0000
    • Description:The drum motor (M1) is faulty. The DC controller PCB is faulty.
      The clock pulses do not arrive for 2 secs or more after the drum motor drive signal (DMFG) has been generated.
    • Code: E013-0000
    • Description:The waste toner feedscrew is faulty. The water toner clock sensor (MSW2) is faulty. The DC controller PCB is faulty.
      The rotation of the waste toner feedscrew goes out of order, and the switch (MSW2) is pressed multiple times during a specific period of time.
    • Code: E014-0000
    • Description:The fixing motor (M19) is faulty. The DC controller PCB is faulty.
      The motor clock signal is detected for 2 secs or more continuously after the fixing motor drive signal has been generated.
    • Code: E020-0000
    • Description:The hopper connector is left disconnected. The hopper motor (M9/M10) is faulty. The toner sensor (TS1/TS2) is faulty. The DC controller PCB is faulty.
      During printing, the toner supply signal is '0' (absence of toner) for 2 mins.
    • Code: E032-0001
    • Description:The copy data controller or the remote diagnostic device is faulty. The Main controller PCB is faulty.
      Although once connected, the copy data controller or the remote diagnostic device has become disconnected.
    • Code: E061-0001
    • Description:The laser shutter is faulty. The laser unit is faulty. The potential measurement PCB is faulty. The DC controller PCB is faulty.
      As the result of potential control, the drum surface potential (VL2) of the white background is about 200 V (generating solid black images).
    • Code: E061-0002
    • Description:The laser shutter is faulty. The laser unit is faulty. The potential measurement PCB is faulty. The DC controller PCB is faulty.
      The primary charging output used for print output and the drum surface potential after laser output has been made are about 200 V (generating solid black images).
      • Code: E100-0001
      • Description:The BD PCB is faulty. The laser unit is faulty. The laser driver PCB is faulty. The wiring is faulty (short circuit, open circuit). The DC controller PCB is faulty.
        In 100 msec after the laser drive signal has been generated, the BD signal is not detected 50 times or more within 40 msecs.
      • Code: E100-0002
      • Description:The BD PCB is faulty. The laser unit is faulty. The laser driver PCB is faulty. The wiring is faulty (short circuit, open circuit). The DC controller PCB is faulty.
        While the laser is on, the BD signal cycle is found to be outside a specific range 10 times or more.
      • Code: E110-0001
      • Description:The laser scanner motor (M15) is faulty. The wiring is faulty (short circuit, open circuit). The DC controller PCB is faulty
        • After the laser scanner motor drive signal has been generated, the motor ready signal (LMRDY*) does not arrive for 15 secs or more. (stop - full speed, half-speed - full speed) • During the period of 'full speed ® half speed', the motor ready signal does not arrive for 60 secs or more after the speed change signal has been generated. • During the period of 'full speed rotation', the motor ready signal is not detected 50 times or more (t intervals of 100 msec).
      • Code: E121-0001
      • Description:The controller cooling fan (FM4) is faulty. The wiring is faulty (short circuit, open circuit). The DC controller PCB is faulty.
        Although the controller cooling fan (FM4) is being driven, the clock signal (FM4CLK) does not arrive for 5 secs or more.
      • Code: E196
      • Description:The EEPROM on the DC controller PCB is faulty. The location of the EEPROM is wrong. The DC controller PCB is faulty.
        1abb: When data is written to the EEPROM, the data written and the data read do not match. 2abb: When the ID read into the EEPROM and the ID into the ROM are compared, a mismatch is found. 3abb: When ID in the EEPROM and the ID in the ROM are compared after the main power switch is turned on, a mismatch is found. a: chip Nos. 0 through 5 (0: IC104, 1: IC105, 2: IC109, 3: IC110, 4: IC127, 5: IC130) bb: chip faulty address (bit)
      • Code: E202-0001
      • Description:The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty.
        The scanner HP sensor does not turn off even when the scanner has been moved 40 mm forward after the main power switch has been turned on or the Start key has been pressed.
      • Code: E202-0002
      • Description:The scanner HP sensor (PS39) is faulty. The scanner motor (M3) is faulty. The reader controller PCB is faulty.
        The scanner HP sensor does not turn on even when the scanner has been moved 450 mm in reverse.
      • Code: E204-0001
      • Description:The ADF controller PCB is faulty. The reader controller PCB is faulty.
        During printing, the image leading edge signal does not arrive from the ADF.
        • Code: E220-0001
        • Description:The lamp inverter PCB is faulty. The reader controller PCB is faulty.
          The lamp inverter PCB is found to have a fault.
        • Code: E225-0000
        • Description:The scanning lamp (xenon tube) is faulty. The inverter PCB is faulty. The CCD/AP PCB is faulty. The reader controller PCB is faulty.
          A specific signal level cannot be attained by CCD gain correction at power-on.
        • Code: E225-0002
        • Description:The scanning lamp (xenon tube) is faulty. The inverter PCB is faulty. The CCD/AP PCB is faulty. The reader controller PCB is faulty.
          The edge gain correction value changed more than a specific level compared with the correction value used for the preceding sheet.
        • Code: E240-0000
        • Description:The main controller PCB. The DC controller PCB is faulty.
          An error has occurred in the communication between the main controller PCB and the CPU of the DC controller PCB.
        • Code: E240-010B
        • Description:The main controller PCB. The DC controller PCB is faulty.
          An error occurred in the sequence during printing.
        • Code: E243-0000
        • Description:The control panel CPU PCB is faulty. The main controller PCB is faulty.
          An error has occurred in communication between the CPU of the control panel CPU PCB and the main controller PCB.
        • Code: E248-0001
        • Description:The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty.
          The ID read into the EEPROM when the main power switch has been turned on and the ID in the ROM do not match.
        • Code: E248-0002
        • Description:The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty.
          When data is written into EEPROM, the data written and the data read do not match.
          • Code: E248-0003
          • Description:The EEPROM on the reader controller PCB is faulty. The reader controller PCB is faulty.
            When data is written, the ID in the EEPROM and the ID in the ROM are found not to match.
          • Code: E302-0001
          • Description:The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open circuit). The reader controller PCB is faulty.
            During shading, the reader controller PCB does not end shading in 1 sec.
          • Code: E302-0002
          • Description:The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open circuit). The reader controller PCB is faulty.
            In stream reading, the edge white accumulation (processing) does not end after a period of 10 secs.
          • Code: E315-0007
          • Description:Main controller PCB, Hard disk drive
            When a start command is seen to the encoder of the compression/ extension element of the main controller, an end interrupt does not occur after 4 sec.
          • Code: E315-0010
          • Description:Main controller PCB, Hard disk drive
            When a start command is sent to the compression/extension element of the main controller at time of decoding, an end interrupt does not occur after 4 sec.
          • Code: E412-0001
          • Description:The cooling fan (FM1) is faulty. The ADF controller PCB is faulty.
            While the cooling fan is being driven, the lock signal (FMLCK) arrives for 100 msec or more.
          • Code: E420-0001
          • Description:The EEPROM is faulty. The ADF controller PCB is faulty.
            When the host machine's power switch is turned on, the backup data of the EEPROM cannot be read or the data, if read, has an error.
          • Code: E421-0001
          • Description:The EEPROM is faulty. The ADF controller PCB is faulty.
            Backup data cannot be written to the EEPROM or the data, if written, has an error.
di Tidak ada komentar:
Langganan: Postingan (Atom)

crack

Pernah kalian sedang bekerja pakai komputer terasa berat atau lemot,, yahh,, itu kemungkinan salah satu nya masalah yang sangat menyebalkan....